engineering.tomorrow.together.

At thyssenkrupp we have more than 156,000 employees in nearly 80 countries and annual sales of €39 billion. We are active in automotive engineering, logistics, plant technology, steel production, elevator manufacturing and much more. We work in large and small businesses all around the world – but we always work together. We have over 200 years of experience in industry and the latest cutting-edge technology. We have a position that‘s right for you, that piques your interest, and that puts your skills to the test.

DC_Development Engineer
thyssenkrupp Presta Shanghai Co Ltd,
Location Shanghai

thyssenkrupp Presta (Shanghai) Co., Ltd. (TK-PS) belongs to thyssenkrupp Presta Group, is wholly owned by 500 fortune – thyssenkrupp. It is located at Pudong Kangqiao Industrial Park with size of 40'000 square meter. Presta Shanghai was registered on May 31st, 2011 with total investment of 114 million Euros. 
thyssenkrupp Presta is one of the most important automotive business units of thyssenkrupp. It has 14 factories in 10 countries including Liechtenstein (headquarters), France, Germany, America, Mexico, Brazil, China and 5 Engineering Center. 
As Asia Pacific headquarter of thyssenkrupp Presta Steering System, thyssenkrupp Presta (Shanghai) is responsible for management of Presta business in Asia Pacific area. Product portfolio of Presta Shanghai covers steering column, steering gear, steering shaft, cold forging parts, EPAS system and Suspension. We’re in the leading position in the global steering columns market (20% global market share, 30% China market share), and we’re the global Top 1 in Steering Columns. With its long term advanced technology and strong competence in steering system and localized engineering center, Presta Shanghai is aiming to be first choice of our customer, to provide satisfied return to our shareholder and to share the business success with our employees. 

Your responsibilities

Job Targets and Decision Making 岗位目标及工作权限

> Suport efficient project management

> Develop concepts and continuous optimization of the products and the procedures

> Constant enhancement and transfer from the know-how

> Reach cost, timing, technique and quality target

> Full fill the tasks and project target, specificly in CAD and construction, calculation and documentation

 

Main Focus of Duties and Responsibilities 主要工作职责

> Design of the products: Acquisition,   Communication, calculation, CAD development, Documentation

> Creation of the technical documentation: 3D models under CAD rules, 2D drawings (products and assembly) under template drawing, guideline, checklist, List of critical characteristics, Compliance Chart, Customer ppt

> Technical Communication with Customer and Supplier and handling and release of TR's

> Prepare Documentation for technical reviews and Requests for customer

> Technical communication with internal and external plants

> Responsible for performing tolerances calculation/ Responsible for Lesson learned updated

> Responsible for performing cost reduction/ weight reduction/ COP/ standardisation/ moudle design

> Responsible for performing PT flow-chart

> Reponsible/Checking for the quality of the drawings /Creation and actualisation of the BOM

> Identified the risk when design review

> Independently lead problem solving when test failed and customer complain

> Independently lead task according to APQP requirement for sub-system product

> Lead the task of functional roles and components expert

> PLM: Data administration, preparation of the reviews and the release of components and sub assembly of the product according his entitlement and in compliance with the PLC, handling and creation of AEMA

> Care on the technical project documentation ( product release, folders...)

> Co responsible for implementation of specification tender (analysis, DVP&R analysis)

> Parpare the invention report and contribution High-tech idea > Parpare sample order and test request

> Support the project manager for achieving the timing, technique, cost and quality targets

> Support the coordination of the prototypes building and the testing

> Support creation and the constant actualisation of DFMEA

> Support the FEM Calculation Engineer by providing up to date datas. Ensure the implementation of the FEM Result in the design

Your profile




Required Competency and Qualification 任职能力及资格


1. Knowledge 知识


Education 学历
Bsc or more, Automotive Engineering or mechanical design


Foreign Language 外语
Fluent Englich and/or German


Computer Skill 计算机
 CAD Catia V5 + Pack MS Office + Solid works


2. Experience 经验


Auto or related experience 汽车或相关行业经验
Preferred to have Product Development Experience in automobile branch


Management experience 管理经验
 


Project leader experience 项目管理经验
 


Project member experience 项目参与经验
Project experience is advantage


Intercultural experience 跨文化工作经验
Interculture Experience preferred


About thyssenkrupp
At thyssenkrupp we have more than 156,000 employees in nearly 80 countries and annual sales of €39 billion. We are active in automotive engineering, logistics, plant technology, steel production, elevator manufacturing and much more. We work in large and small businesses all around the world – but we always work together. We have over 200 years of experience in industry and the latest cutting-edge technology. We have a position that‘s right for you, that piques your interest, and that puts your skills to the test.

thyssenkrupp Presta (Shanghai) Co., Ltd. (TK-PS) belongs to thyssenkrupp Presta Group, is wholly owned by 500 fortune – thyssenkrupp. It is located at Pudong Kangqiao Industrial Park with size of 40'000 square meter. Presta Shanghai was registered on May 31st, 2011 with total investment of 114 million Euros. 
thyssenkrupp Presta is one of the most important automotive business units of thyssenkrupp. It has 14 factories in 10 countries including Liechtenstein (headquarters), France, Germany, America, Mexico, Brazil, China and 5 Engineering Center. 
As Asia Pacific headquarter of thyssenkrupp Presta Steering System, thyssenkrupp Presta (Shanghai) is responsible for management of Presta business in Asia Pacific area. Product portfolio of Presta Shanghai covers steering column, steering gear, steering shaft, cold forging parts, EPAS system and Suspension. We’re in the leading position in the global steering columns market (20% global market share, 30% China market share), and we’re the global Top 1 in Steering Columns. With its long term advanced technology and strong competence in steering system and localized engineering center, Presta Shanghai is aiming to be first choice of our customer, to provide satisfied return to our shareholder and to share the business success with our employees. 

Your responsibilities
Job Targets and Decision Making 岗位目标及工作权限

> Suport efficient project management

> Develop concepts and continuous optimization of the products and the procedures

> Constant enhancement and transfer from the know-how

> Reach cost, timing, technique and quality target

> Full fill the tasks and project target, specificly in CAD and construction, calculation and documentation

 

Main Focus of Duties and Responsibilities 主要工作职责

> Design of the products: Acquisition,   Communication, calculation, CAD development, Documentation

> Creation of the technical documentation: 3D models under CAD rules, 2D drawings (products and assembly) under template drawing, guideline, checklist, List of critical characteristics, Compliance Chart, Customer ppt

> Technical Communication with Customer and Supplier and handling and release of TR's

> Prepare Documentation for technical reviews and Requests for customer

> Technical communication with internal and external plants

> Responsible for performing tolerances calculation/ Responsible for Lesson learned updated

> Responsible for performing cost reduction/ weight reduction/ COP/ standardisation/ moudle design

> Responsible for performing PT flow-chart

> Reponsible/Checking for the quality of the drawings /Creation and actualisation of the BOM

> Identified the risk when design review

> Independently lead problem solving when test failed and customer complain

> Independently lead task according to APQP requirement for sub-system product

> Lead the task of functional roles and components expert

> PLM: Data administration, preparation of the reviews and the release of components and sub assembly of the product according his entitlement and in compliance with the PLC, handling and creation of AEMA

> Care on the technical project documentation ( product release, folders...)

> Co responsible for implementation of specification tender (analysis, DVP&R analysis)

> Parpare the invention report and contribution High-tech idea > Parpare sample order and test request

> Support the project manager for achieving the timing, technique, cost and quality targets

> Support the coordination of the prototypes building and the testing

> Support creation and the constant actualisation of DFMEA

> Support the FEM Calculation Engineer by providing up to date datas. Ensure the implementation of the FEM Result in the design

Your profile



Required Competency and Qualification 任职能力及资格


1. Knowledge 知识


Education 学历
Bsc or more, Automotive Engineering or mechanical design


Foreign Language 外语
Fluent Englich and/or German


Computer Skill 计算机
 CAD Catia V5 + Pack MS Office + Solid works


2. Experience 经验


Auto or related experience 汽车或相关行业经验
Preferred to have Product Development Experience in automobile branch


Management experience 管理经验
 


Project leader experience 项目管理经验
 


Project member experience 项目参与经验
Project experience is advantage


Intercultural experience 跨文化工作经验
Interculture Experience preferred